|
|
|
|
Equipment & products in use on
Mad Dog Voyager
Return to
The Mad Dogs Equipment & Gear page
|
|
|
|
 Product:
Battery Life Saver / Desulfator / Page 2 of 2
What is The Battery Life Saver electronic desulfator?
The Battery Life Saver electronic desulfator (BLS) was invented
in 2002 by a Florida resident, Charles Van Breemen. It was
developed because he was tired of batteries failing when he
needed them most. He also wanted to protect the environment from
harmful battery waste. Awarded a Patent in 2008, the Battery
Life Saver brings old and weak batteries back to life, restores
functioning batteries to a like new condition, and extends
battery life. It keeps batteries from losing capacity and life
due to the main cause of battery failure: the buildup of lead
sulfate
Why is The Battery Life Saver electronic desulfator needed?
75% to 80% of lead acid batteries fail prematurely because of
formation of lead sulfate on the plates. These crystals cause
batteries to become unusable at approximately one-third of their
natural life. The Battery Life Saver electronic desulfator
dissolves the lead sulfate crystals.
How Does it Work?
Using breakthrough square wave technology, The Battery Life
Saver electronic desulfator sends a frequency signal to each
crystal of lead sulfate, causing it to dissolve into lead and
sulfuric acid. This restores the battery to its original
condition and allows the electrical charge to be drawn from the
battery.
Benefits of Using The Battery Life Saver electronic
desulfator:
It makes old batteries as good as new. It keeps new batteries
like new, saving time and money. With The Battery Life Saver
electronic desulfator, more power is available from your battery
and you need less power to charge it. By reducing the number of
batteries that get thrown away and put in landfills, The Battery
Life Saver electronic desulfator protects the environment.
The Battery Life Saver electronic desulfator Can be Used in
Several Different Ways:
Connecting and using the Battery Life Saver is very easy, just
connect it and forget it! Only one device is needed per battery
system. The device works off of the power of the battery (the
system should be charged regularly), and therefore does not have
to be plugged into AC power. All of the units come with two
leads (wires) just like jumper cables. Simply connect the red
wire to the main positive battery terminal and the black wire to
the main negative battery terminal. Some units are equipped with
alligator type clips and others come with eye rings for
permanent attachment to the batteries.
To restore a dead or barely usable battery, connect the Battery
Life Saver electronic device to the battery, along with your
battery charger. The Battery Life Saver will gradually
rejuvenate the battery or battery system with every cycle
(charge and discharge). With the Battery Life Saver connected,
fully charge the battery, then discharge the battery (the
Battery Life Saver operates from the power of the battery, thus
you can use the BLS to discharge the battery). This process can
take a couple cycles or many cycles depending on the condition
and size of the battery or battery system.
To maximize battery life, connect the Battery Life Saver
electronic desulfator to your new battery or battery system and
let it be! To maintain working batteries, install the Battery
Life Saver electronic desulfator on your battery or on a bank of
batteries. It rejuvenates the batteries while it is in service.
This causes more power to be available from the battery and
causes less power to be needed to charge the battery. This is
the best way to extend the life of your batteries. It’s like
having a brand new battery every time you use it.
The Battery Life Saver electronic desulfator is suitable for:
●
Marine applications
●
Golfcarts
●
Industrial Applications
●
Automotive applications
●
RV (Recreation Vehicles) applications
●
Motor bikes, Scooters, Go Carts etc
Return to the first page |
| |
|
|
All
other logos and trademarks are the property of their respective owners